|
|||||||
| Boot-Loader Discussion about http://boot-loader.com site |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Junior Member
Join Date: Feb 2005
Posts: 2
|
I have a c 390 All ok except :
Ok to Program USB transfert Mode RDL SIG ERROR And the log Clip serial: xxxxxxxxx, version: 2.21, initializing... OK Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Searching for phone... found Motorola Phone (C390), getting test interface... AT command error Searching for phone... found Motorola Phone (C390), getting test interface... OK Model C390 Firmware R368_G_0B.A0.0FR Reading info OK Switching to flash mode... OK [S Flash Neptune LTE] Reading phone boot version... 8.26 Sending boot... load error Warning: Phone may need "Remove RSA" procedure to get unlocked or flashed, check model list at "Unlock" tab if flash mode fails to start I can' flash the phone, and I just wan't to unlock it Last edited by 22gsm; 2006-01-13 at 21:34. |
|
|
|
|
|
#2 |
|
Member
Join Date: Jan 2005
Posts: 56
|
You need to perform a testpoint ...
![]() WARNING Disconnect phone LCD when using tespoint please. Be aware, that during work with testpoint, all signals go directly to processor. So any incorrectness in connection of testpoint can seriously damage the handset. So please follow all instructions very carefully! |
|
|
|
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|