Unlock A925

[zokivan]

Hi all!!!
I have SMART-Clip and can't unlock Motorola A925.
When I push the button for UNLOCK on smart-clip phone not enter is Test mode.
Sorry for my English.

Thank you.

[sc_support]

Unlock procedure for Motorola A920/A925/A1000
Power the phone on.
Connect the phone to a powered clip. Phone display should give "USB cable connected" message.
Press UNLOCK button on the clip.
Phone reloads. Within 5-10 seconds phone display gives "Waiting for PST" message.
Press A and B keys simultaneously in upper part of the handset. The phone enters boot mode (if you don't press these 2 keys during "Waiting for PST" message, the clip will give red E/G led and you will have to start with step 1 again).
After A and B keys have been pressed E/G green led will blink and phone reboots. Meanwhile E/G will give frequent green blinking and phone will turn on.
Do not disconnect cell phone from Smart-Clip while green led indicator blinks!
Green E/G led glows. The cell phone is unlocked.

Some phones do not display "Waiting for PST" message. Wait 5 seconds aftter phone reloads & press keys A & B.