repair pds inet error 12002

[ACID_ICED]

i tried repair pds of v3r and v3x but i always give an error like this inet error 12002 when receiving response from server..

heres the logs...


SmartMoto 3.20
S-Card: xxxxxxxxx Smart-Clip dongle, v 2.10, assigned Smart-Clip: xxxxxxxxxEurope, initializing... OK
Clip serial: xxxxxxxxx, version: 4.08, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... none, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,U 3,W5,W490,W510,Z3
Hardware IMEI: 359419008xxxxxx
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE2 35941900816xxxx (9).mbk"
closing connection... OK
inet error 12002


what this error means...

[Mr.Tinkertrain]

@ ACID_ICED,

Server was tested and working properly. Try to perform Repair PDS procedure once again.

[nctrung_vn]

Please team SC to fix this problem.
I'm have problem 2 week with the same inet error 12002 .

Thank a lot for.

[boot-loader]

Make sure that:

1. Firewall on your computer (or your LAN) is configured properly or disabled
2. You have reliable internet connection
3. LPT port settings are set to EPP in BIOS
4. Your LPT cable works properly
5. You use a stable power supply with your clip (use power adapter)
6. Your IE version is not lower than v5.0
7. If you run update under WinXP, log in as Administrator or any other account with administrative rights