Help newbie , please..............!

[nanakase]

I,m a newbie for smartclip/smartmoto.
I want to flash V3/V3i/L6/L7/U6 to Simplify chinese & Traditional chinese!
But I can't find out the full flash file!
SC team can help me?:cry:

[sc_support]

Hi, nanaKase
Unfortunately we do not have flash files with language packs containing Chinese language as yet.
You may backup a lp you need from another phone of the same model and then flash it onto your phone. Backup and flash functions are available via Smart-Clip and SmartMoto program.

[nanakase]

How to use the backup file to flash to another phone?
I have read some V3 chinese LP and I have flash to another V3..............
Unfortunately when I change it to chinese I can't use phonebook or some
function , WHY?
Is it I want to full flash the phone or else?

[sc_support]

Please, tell me sw versions of the phone you've backed up the lp from and the phone you are trying to flash with this lp.

[nanakase]

The firmware is R374_G_0E.42.10R_A
The lp version is R374_G_0E.42.10R_A
But the phone is English and I flash it to chinese
Is it ok?

[nanakase]

Hi SC team
i want to ask I have follow the "connect via test point"procedure.
But Smartmoto told me "no phone found" and "Please connect the phone"some else!
Can you teach me step by step to connect the test point?

[sc_support]

Hi, nanakase

After disassembling you have to connect the phone to
the Smart Clip and the SC to your PC. Smart Moto program must run on
the PC at the moment.

"To connect the tespoint to ground" means to take a 2-3 inches
long piece of thin copper wire and to touch the test point with one
end of the wire and the main board metal cover -- with the other end. In this
case the main board metal cover will be the "ground".
Please, hold the wire with the forceps in that position for about 2-3
sec. until the SM detects the phone. Then you may disconnect testpoint
simply by removing the wire.
Testpoint picture and instructions you may see at www.boot-loader.com > SMARTMOTO

[nanakase]

Thx SC team!
But you haven't answer me the V3 question?
The firmware version is same to lp version.

[sc_support]

Hi, nanakase
Please, tell me sw versions of the phone you've backed up the lp from and the phone you are trying to flash with this lp.

You've only posted the version of one phone -- that is why I cannot tell whether the versions are compatible.
:cool:

[nanakase]

Oh sorry!
I make a mistake!
The back up one is R374_G_0E.42.10R_A
And The trying to flash one is R374_G_0E.42.10R_A
It's same version!

[MoTo_HeRo]

Thx SC team!
But you haven't answer me the V3 question?
The firmware version is same to lp version.

The firmware version is different from lp version.
For exemple firmware names are like R4515_G_08.XX.XX some thing like that :)

But LP names are named like this http://forum.gsmserver.com/showthread.php?t=2006 check this thread and you'll understand more I hope.

You can check your LP version only from your PHONE or if you're advanced modder, from your full backup using XVI32.

[nanakase]

Thx MoTo HeRo!
The back up one LP is 004D/014D/0024
I want to flash one is 0039
Any idea?

[sc_support]

Hi, nanacase
In this case you can just make backups ffrom both telephones, then flash your phone with backed up FULL FLASH FILE and then restore original security zone of your phone.
Good luck!

[nanakase]

The back up file is different imei , I have try to flash to another phone.
then the phone can't turn on.How can I flash back the original security zone?
The phone can't connect the clip?

[MoTo_HeRo]

Thx MoTo HeRo!
The back up one LP is 004D/014D/0024
I want to flash one is 0039
Any idea?

You cannot have all those Language pack in your mobile at the same time lol
Anyway, what's your firmware version ?

EDIT : please, make me understanding more so I can help more !
Your phone can't turn on or what ?
Please DETAILS for me, I'm lazy to read what you wrote :mrgreen:

[nanakase]

I'm not taiking about I want to use all language.
I just want to know how to use the back up file to flash to another phone
because Smartclip haven't support the chinese monster pack!

When I use the phone back up file flash to another phone.
When I finnish , the phone just have keypad light on & on & on.................
The phone still can't turn on.If the phone can't turn on , how to flash back the security zone?

Can I upload the backup file to SC Team to make the chinese monster pack?

[MoTo_HeRo]

For sure you cannot use other backups to flash them on other mobiles !! it'll just kill them.
Ta convert an *.bin file to *.shx file from one model to other model there too much compatibilities that you have to check.

If you wanna use an V3 full backup to another V3 for exemple you have to make it shx files yes. It's possible, but very hard you have to do same patchs which are hard too.

To revive your phone, try to run it on boot loader mode ( or just get it connected ) then try flashing it with an original firmware for your mobile. If not working, you need your pds backup that you can extract from your full backup (hard too) it's the security area that you need !

After you revive the mobile, I'll help you with other ways to have chinese LP.
Also, I can patch firmwares, but noo time !

Good luck,
Ciao.

[nanakase]

Either you can help me or not,say thx to you first!
Do you know what problem I face now?
I have a lot of chinese LP,but if I flash it to another phone and change to
CHINESE,it can't use phonebook!
It's the mainly problem NOW I FACE!
Can you help me?

Can I upload the backup file to SC Team to make the chinese monster pack?

[MoTo_HeRo]

Can I upload the backup file to SC Team to make the chinese monster pack?

PM an ADMIN

[nanakase]

Hey SC Team!
When you can answer my PM?

[nanakase]

Hey sc team!
Too slow man!

[nanakase]

Hey SC Team!
Still long Vocation?
When you WAKE UP?
When you can give me the firmware?
Too slow man!