alsitn
2006-02-17, 23:53
Before You Do Any Flashing Make Sure YOur Phone Is CHARGED UP 80%-100%, As You Could Kill It, If Not Charged Enough
P= RSD LITE 2.4 Wont find my phone.
F= Install p2k 2.9 drivers including flash command ones
P= How To Get Into BootLoader
F= * + # + power key
P= After flashing your phone will only go into boot loader.
F= Flash again with the SW you had before or a .34R SW.
P= After flashing your phone it will not turn on only the keypad flash for a sec or two
F= Get Into Bootloader and flash again with the SW you had before or a .34R SW.
P= After flashing phone with new MP, and when typeing message it doesnt show english words.
F= While typing message, middle softkey > entry setup > and pick iTap English (dictionary) or Tap English as either Primary Or Secondary.
P= After Flashing with iTunes MP/SW on non-Itunes V3i you get a message saying "iTunes is not supported"
F= there is none yet, if you can hack your PDS and modfiy the code it might work.
P= After flashing your phone, the LCD doesnt light up, but can hear the start up sound.
F= Flash again with different MP and the flash again with the one you had the problem.
P= After flashing your phone with new MP, it wont connect to p2k tools or any other P2K program.
F= menu > setting > connectivity > USB settings > default connection set to Data/Fax.
P= I have no contacts in my phonebook anymore after MPing my phone.
F= You should of backed them up to your sim or to MPT, all you can do is now is ask them for there number again.
P= I do not have Voice Commands (VST) anymore.
F= Download UK English VST and put in /C/mobile/vst, and dlete the other ones thar are there if you wish.
P= While flashing phone display "critical error" while in boot loader and flash stops and fails
F= Unplug phone, turn off, then turn on and it should turn on normally, then connect up again making sure its charged up and start the flashing again
P= After flash with new MP i have a lil symbol in the top with a phone reciver and 1. (means you are using line 1)
F= To remove open P2k tools > other features > Get > other > untick "settings > phone status > active line (multiline support)
P= After Flashing you get "Verifying Checksums" error, do not worry.
F= Phone will work normally, if you encounter any problems flash it again with the same MP/Flash/Flex/LP.
This guide has been made by Pioneer @ Motox
P= RSD LITE 2.4 Wont find my phone.
F= Install p2k 2.9 drivers including flash command ones
P= How To Get Into BootLoader
F= * + # + power key
P= After flashing your phone will only go into boot loader.
F= Flash again with the SW you had before or a .34R SW.
P= After flashing your phone it will not turn on only the keypad flash for a sec or two
F= Get Into Bootloader and flash again with the SW you had before or a .34R SW.
P= After flashing phone with new MP, and when typeing message it doesnt show english words.
F= While typing message, middle softkey > entry setup > and pick iTap English (dictionary) or Tap English as either Primary Or Secondary.
P= After Flashing with iTunes MP/SW on non-Itunes V3i you get a message saying "iTunes is not supported"
F= there is none yet, if you can hack your PDS and modfiy the code it might work.
P= After flashing your phone, the LCD doesnt light up, but can hear the start up sound.
F= Flash again with different MP and the flash again with the one you had the problem.
P= After flashing your phone with new MP, it wont connect to p2k tools or any other P2K program.
F= menu > setting > connectivity > USB settings > default connection set to Data/Fax.
P= I have no contacts in my phonebook anymore after MPing my phone.
F= You should of backed them up to your sim or to MPT, all you can do is now is ask them for there number again.
P= I do not have Voice Commands (VST) anymore.
F= Download UK English VST and put in /C/mobile/vst, and dlete the other ones thar are there if you wish.
P= While flashing phone display "critical error" while in boot loader and flash stops and fails
F= Unplug phone, turn off, then turn on and it should turn on normally, then connect up again making sure its charged up and start the flashing again
P= After flash with new MP i have a lil symbol in the top with a phone reciver and 1. (means you are using line 1)
F= To remove open P2k tools > other features > Get > other > untick "settings > phone status > active line (multiline support)
P= After Flashing you get "Verifying Checksums" error, do not worry.
F= Phone will work normally, if you encounter any problems flash it again with the same MP/Flash/Flex/LP.
This guide has been made by Pioneer @ Motox